Keeping time and date

Keeping time and date is relatively simple if one uses an external component. It is in principle possible to use the PIC microcontroller itself, moving it into sleep mode, giving it a 32.768 kHz crystal, et cetera. However, the head aches are not worth it if you have the space for a 8 pin DIP, like the DS1302. The DS1307 is another option if you wish to use I2C. This circuit was meant for my calculator, mostly to keep the date so it would tell me of birthdays that I might otherwise miss.

Connecting a DS1302 is pretty simple: just connect the 3 wires to the PIC microcontroller, connect the X1 and X2 to an appropriate crystal (these crystals have very small pins, so if a socket is used for the DS1302, something I would recommend, you can add the crystal to the same socket, and not solder it) and connect the power. Do not forget the 0.1uF decoupling capacitor, although in this case it might be less important, because the DS1302 is supposed to work using a backup battery. The DS1302 can charge this backup battery, so the ideal choice is a super capacitor. The value in the circuit is no joke, I used a 1F capacitor for this purpose. They are slightly bigger than a watch battery and can NOT handle voltages larger than 5V. However, most of the time it will not charge over 2V, which is still sufficient for the DS1302 to work. It has never lost time in my application, even with the power being off for weeks. The hardest part of the DS1302 is the software, but fortunately you can just copy the pieces of code that I wrote.